Tikkurila water-based specialty wood filler. Once dry, Spakkeli Wood Filler matches the color of untreated wood. Suitable for leveling out unevenness and defects on wood surfaces indoors—furniture, doors, interior walls and ceilings, and other wood surfaces. Once dry, filled areas can be varnished, painted, or stained.
• Color: birch
• Thinner/solvent: water
• Tools: putty knife
• Drying time at 23°C and 50% relative humidity: a thin layer of filler is sandable after approximately 4 hours; thicker layers can be sanded the following day.
• Solids content: 67%
• Storage: Protect from cold
Surface preparation: The surface to be filled must be dry, with a temperature of at least +5°C and relative humidity below 80%. Clean the surface of dirt, dust, and loose particles.
Application: Apply Spakkeli Wood Filler to the surface with a putty knife. Thin with water if necessary. When filling larger holes, apply two or more coats of putty. Sand the dried surface and remove any sanding dust. The surface can be primed with, for example, Pirtti panel primer or Dicco Colori primer. Varnish with, for example, Kiva Furniture Varnish, Paneeli-Ässä Panel Varnish, Jalo Matte Varnish, Miranol Varnish, or Diccoplast Catalytic Varnish. Wash tools with water after use.
Environmental Protection Measures and Waste Management: The operator must dispose of waste in accordance with local waste management regulations. Do not pour paint products into the sewer system, onto the ground, or into bodies of water. Recycle clean, dry containers; dispose of liquid residues at a collection point for hazardous chemicals.