ISOVER VKL is a rigid insulation board without a surface coating. It is made of inorganic, chemically neutral material and contains no corrosive components. It is odorless, does not rot, and does not provide a favorable growth medium for mold. It complies with the M1 pollution class for building materials.
ISOVER VKL is primarily used as a combined insulation and wind barrier board in exterior walls, attics, and ventilated subfloors. The product is suitable for use in both new construction and renovation projects. It is also suitable for use as an impact sound insulation board. ISOVER VKL is particularly well-suited for thermal insulation and wind barrier applications in metal-frame structures (such as industrial buildings), as well as for breaking thermal bridges.
The wind barrier board measures 1200 x 2700 x 13 mm. Each package contains 10 pieces = 3.24 m².
Installation:
The joints between wind barrier panels must remain impervious to ventilation air so that the ventilation air does not displace the air trapped between the wool fibers, which is what ensures the wool’s thermal insulation properties. ISOVER VKL is fastened to the studs using washers and nails or screws. It is recommended that the wind barrier boards be installed so that the joints along their longer sides align with the wood studs. The horizontal joints between VKL13 boards that do not align with the studs must be sealed with an elastic, weather-resistant construction sealant (such as neutral silicone NA) before the panels are pressed together to ensure lasting wind tightness at the joints. VKL 13 wind barrier panels must not be taped, as the tape will not adhere to their surface; if it falls off the panels later, it may actually clog the ventilation channel, preventing the flow of ventilation air. To seal the joints, we recommend using a neutral construction sealant. The sealant bead should be 4–6 mm in diameter and applied to the edge of the wind barrier panel during installation.