KNAUF ELECTRIC PLASTER, 5 KG

Knauf Electrical Plaster is an industrially manufactured construction plaster used indoors. This construction plaster sets quickly, is stable, and does not shrink. It is suitable for various installation tasks, such as quickly securing electrical wires, wall outlets, and other components. It is also suitable for securing corner protection profiles and plaster beacons. The ready-mixed compound must be used within 8 minutes. Surface preparation: The substrate must be smooth, clean, dry, load-bearing, free of form release agents, and dust-free. Remove loose particles, dirt, and dust. Prime absorbent surfaces with Knauf Tiefengrund. Mixing and Application: Pour Knauf Elektrikergips into a mixing tray with cold, clean water (1 kg of mix + approximately 0.45 liters of water) and mix immediately until a uniform, lump-free consistency is achieved. The prepared mixture is usable for approximately 8 minutes. Apply the mixed plaster to the surface using a trowel, putty knife, or other suitable tool. The layer thickness may be several centimeters. After setting, the surface can be smoothed with a damp sponge. Anchors secured with electrical plaster can be loaded after 24 hours. Clean tools immediately after use.