Kiilto LH is an adhesive-based wall filler for wall and ceiling surfaces in dry indoor areas. It is also suitable for spray-applying to ceilings. Depending on the filling requirements, rough surfaces must first be filled with Kiilto TT, Kiilto SK, or Kiilto LK wall filler. The finished surface can be painted or wallpapered. It is recommended to paint the surfaces before wallpapering. Not suitable for use under ceramic tiles or vinyl wall coverings.
• Layer thickness: 1–2 mm
• Drying time: approx. 1 day (18°C)
• Application conditions: recommended: 18–20°C, minimum application temperature 10°C
• Maximum particle size: 0.25 mm
• Adhesion strength: > 0.3 MPa (EN 15824)
• Binder type: plastic dispersion-limestone-based powder
• Color: light
Instructions for use: The surface to be filled must be clean, dry, and free of dust. A new coat may only be applied once the previous one is dry. If necessary, carefully sand and clean the surface before applying a new coat.
Slowly sprinkle Kiilto LH powder into cool (18°C), clean water, stirring constantly until a uniform mixture is achieved. Let the mixture stand for about 15 minutes, then stir again. Apply the putty to the surface by hand using a steel putty knife or a spray gun. A layer applied with a spray gun must be smoothed over by hand. If you want to save the remaining putty for the next day, cover the container carefully to prevent the putty from drying out.
Storage: Up to 1 year in unopened packaging in dry conditions.
Safety: Avoid skin contact with the uncured product; wear protective gloves.