Knauf SuperFinish is a ready-to-use, universal joint compound for indoor use. It consists of calcium carbonate, fillers, additives, and a polymer binder. It is suitable for finishing drywall joints, filling surfaces, and smoothing various substrates, such as plaster, concrete, aerated concrete, and brickwork. The joint compound has good adhesion, a soft consistency, and is very easy to apply and sand. The compound sets as it dries; the curing time depends on humidity and room temperature. The temperature of the material, substrate, and ambient air must not fall below +10°C during application and until the compound is completely dry.
Surface preparation: The substrate must be dry, load-bearing, sound, level, and clean. Remove any existing material residues that prevent adhesion, such as paste, paper scraps, etc. Gypsum boards must be securely fastened to the substrate; furthermore, the boards must be dry and clean, including joints free of dust. Fill larger surface defects with Knauf Uniflott gypsum filler. For a smooth finish, the filled board joints must be dry and flush with the surface of the gypsum board.
Mixing: Thoroughly mix the joint compound in the bucket; if necessary—for example, when using a joint compound sprayer—thin it with a small amount of water—up to 1 liter of water per 20 kg bucket. Use clean mixing containers and tools. Do not mix the joint compound with other materials.
Tools: Joint trowel, finishing trowel, screw-tip jointing trowel, wide jointing trowel, or Knauf jointing and corner finishing tool.
Storage: Protect from cold, high temperatures, and direct sunlight. Store at room temperature for at least 12 months.