Kiilto Fibergum is a ready-to-use, fiber-reinforced waterproofing mastic that is applied under wall and floor tiles in bathrooms, saunas, and other damp areas. It is not suitable for use in areas that are constantly submerged in water (such as swimming pools) or where temperatures exceed +60 °C (such as the walls of a sauna steam room). The substrate must be dry, absorbent, dust-free, and level. Any materials that impair adhesion must be removed. Check the suitability of the structure and substrate for waterproofing and tile installation. Underfloor heating must be installed in the concrete or floor leveling layer beneath the waterproofing mastic so that it does not come into direct contact with the waterproofing. Kiilto Fibergumi’s compatibility with the most common types of floor heating systems has been tested and approved. To verify compatibility, please consult our technical support or your floor heating system supplier.
Substrate: Concrete, bricks, cement-based leveling compounds, and construction panels used in damp areas.
Subfloor moisture: Kiilto floor and wall leveling compounds can be waterproofed after the drying time specified in the product instructions has elapsed.
Concrete moisture content: < 90% RH
Curing temperature: up to +60 °C
Application temperature: +15…25 °C
Drying time: approx. 2 h (1st coat), approx. 6 h (2nd coat)
Coverage: Floors: min. 1 kg/m² (2 coats). Walls: min. 0.8 kg/m² (2 coats)
Frost resistance: freezes
Crack bridging: > 1.5 mm
Binder type: SBR
Water vapor permeability
Consumption on walls:
W = 110 × 10ˉ¹² kg/(m²sPa)
Z = 66,600 s/m
Sd = 1.8 m
Consumption on floors:
W = 60 × 10⁻¹² kg/(m²sPa)
Z = 122,000 s/m
Sd = 3.3 m