Vivacolor LH is a water-based, ready-to-use lightweight putty for dry indoor areas. It is suitable for smoothing plaster, concrete, brick, drywall, and primed wood fiberboard surfaces, as well as for filling joints, cracks, and holes. The putty dries quickly, is easy to sand, and is simple to apply and level.
• Binder: acrylic copolymer
• Filler: dolomite, lightweight filler
• Particle size: max 0.2 mm
• Layer thickness: max 4 mm
• Adhesion: 0.90 N/mm²
• Color: light gray
• Coverage (single application): ~1 l/m² when applying a 1 mm-thick layer to the surface; ~0.25 l/m² when applying two coats to drywall joints and screw heads.
• Application method: with a putty knife
• Drying time: 1 mm – 3 hours
• Cleaning of tools: water
• Storage: protect from cold
• Shelf life: 2 years from the date of manufacture in tightly sealed original packaging (see packaging)
Surface preparation: The surface to be filled must be clean and dry, with an air temperature of +5°C to +28°C and relative humidity below 80%. Avoid drafts during application.
Unpainted surfaces: Clean the surface of dust and dirt. Wash soiled or previously painted surfaces with Special Clean, rinse, and allow to dry. Prime weak or dusty surfaces with Special Primer alkyd primer.
Previously painted surface: Clean the surface of old, flaking paint, dust, and dirt. Wash dirty or previously painted surfaces with Special Clean, rinse, and let dry. Sand glossy surfaces to a matte finish and remove sanding dust. Prime weak or dusty surfaces with Special Primer alkyd primer.
Filling: Apply filler with a putty knife. Reinforce joints and cracks beforehand with paper or fiberglass tape. Sand the dried filler surface and remove sanding dust. When sanding, protect your eyes and respiratory tract from dust. Apply a second coat if necessary. For a smoother finish, apply Vivacolor LF fine putty as the final coat. Before washing, remove excess putty from tools and wash them with water.
Waste Management, Environmental Protection, and Occupational Safety: The operator must dispose of waste in accordance with local waste management regulations. Do not pour paint products into the sewer system, onto the ground, or into bodies of water. Recycle clean, dry containers; dispose of liquid residues at a hazardous chemical collection point.