BITUMEN MASTIC ICOPAL WATER RENOVATOR 20 KG

Icopal Water Renovator is a water-soluble rubber-bitumen compound. It is used for the restoration and preservation of bitumen roofing membranes; priming of substrate surfaces; constructing waterproof floors, walls, foundations, and other building components; and as a corrosion-protective coating on sheet metal structural elements. Application: Apply in dry weather when the outside temperature is at least +10°C. Apply a layer of rubber-bitumen to the previously primed surface using a brush or roller. The substrate must be dry or slightly damp, without puddles. The maximum thickness of a single coat is 1 mm. At least two coats must be applied to form a waterproofing layer. The next layer may only be applied once the previous layer has dried. The drying time for a single layer at a temperature of +20°C is approximately 6 hours. Once the layer has dried, its color changes from brown to black. The top layer of rubber bitumen must be sprinkled with a mineral filler before it dries completely. The consumption of rubber bitumen for one coat is 0.8–1.1 kg/m². The consumption of the mineral aggregate is approximately 1 kg/m². Notes: 1. Rubber bitumen may only be applied in dry weather. 2. The rubber bitumen used in the bottom layer must be diluted with water. 3. Rubber bitumen must be applied cold; do not heat it. Mix thoroughly before application; store and keep at a temperature above +5°C.