PAHTEL SOUDAL METAL PLASTIC SOFT 2 KG (AUTO)

Soudal Metal Plastic Soft is a two-component polyester putty based on unsaturated polyester resins. It offers excellent adhesion to all metals, including non-ferrous metals and zinc-coated surfaces, as well as to polyester and wood. Suitable for filling dents, scratches, and cracks on car bodies and parts coated with zinc and polyester; for repairing damage to boats and surfboards; and for filling scratches and dents on wooden surfaces. • Binder: amine-preaccelerated polyester resin • Consistency: stable paste • Curing system: chemical reaction • Pot life after mixing: approximately 5 minutes • Sandable after: 30 min • Shore D hardness: 70–75 • Temperature resistance: –30°C to +115°C • Density: 1.9 g/cm³ Packaging: Colors: Component A—beige, Component B—red Packaging: Component A in a 1 kg, 2 kg, or 3 kg metal can for a dispenser; Component B in a 30 g tube Surface preparation: The substrate must be clean, dry, and free of dust and grease. Remove rust; sanding with sandpaper improves adhesion. Mixing and Application: Mix 2% of Component B with Component A. Ensure thorough mixing to achieve a uniform mixture. Do not mix more material at once than you can use within 5 minutes. NEVER DEVIATE FROM THE SPECIFIED RATIO OF COMPONENTS A AND B! Any deviation will affect both the drying time and the final mechanical properties of the filler. Apply the mixed product to the surface with a putty knife in a thin layer. Apply multiple layers as needed. The putty can be sanded after 20–30 minutes, depending on the ambient temperature. Once a layer has hardened, the process may be repeated if necessary. The application temperature should be between +10°C and +25°C. Cleaning: Uncured filler can be cleaned with acetone; cured filler can be removed mechanically. Storage: 12 months in unopened packaging in a cool, dry place at temperatures between +5°C and +25°C.