Sakret ZM is a masonry and plaster mix for exterior and interior use. With high mechanical strength and weather resistance, ZM is vapor-permeable and water-repellent.
Suitable for plastering chimneys and areas requiring increased mechanical strength, such as baseboards. Can be used for building chimneys (excluding fireboxes). Suitable for building with clean joints.
Coverage for plastering: 16 kg/m² per 10 mm layer. 1,600 kg of dry mix = 1 m³.
Mix Preparation
: Mix the dry mix with clean, cold water using a mixer until a uniform, lump-free consistency is achieved; mixing time: 4–8 min. Do not add water to a mix that has begun to set! Optimal working temperature: +5°C to +30°C. Higher temperatures accelerate the setting of the mixture; lower temperatures delay it. Do not use in sub-zero temperatures without an anti-freeze additive! In winter conditions, when plastering or laying at temperatures as low as -10°C, add approximately 65 ml of Sakret AF anti-freeze additive per 25 kg bag of mix. Protect the wall being laid from precipitation and other harmful weather conditions.
Masonry
Work
Bricks and blocks must be clean and dry. Apply the mixture to the masonry using a trowel. Jointing is performed during the laying process; the best-quality joints are achieved with a mixture that has set sufficiently. Do not move the masonry after the mortar has set!
Plastering
The surface must be clean, sound, level, and dry. Fill cracks and holes. Old masonry and plaster surfaces must be cleaned with a sandblaster or high-pressure water jet. Remove flaking plaster and peeling paint; also clean oily or other surfaces that prevent adhesion. Prime particularly smooth and low-absorbent surfaces with Sakret QG quartz primer or roughen them with an abrasive. Prime highly absorbent substrates with Sakret BG primer or Sakret UG primer concentrate (dilute with water in a ratio of up to 1:3). Sakret ZM is not suitable for overplastering surfaces previously plastered with lime or lime-cement plasters!
• Compressive strength class: M10 according to standard EN 998-2S IV•
Plaster class: CS IV according to standard EN
998-1• Fire resistance class: A1 (non-combustible)
• Aggregate size: up to 2 mm•
Shelf life: 12 months from the date of manufacture when stored in the original packaging