Sakret BE is a dry-mix concrete suitable for various concrete casting applications (e.g., posts, monolithic elements, floors, etc.) for both interior and exterior use. It can be used for pouring heated floors.
BE is water- and frost-resistant. The recommended minimum layer thickness for floor casting is 40 mm. Aggregate size up to 8 mm. 2,000 kg of dry concrete = 1 m³.
Surface Preparation
The substrate must be stable, strong, and free of cracks. Clean the surface of loose surface layers, dust, oil, paint residues, etc. Treat particularly dense and/or smooth surfaces with an abrasive. Prime mineral substrates with Sakret UG primer (dilute with water at a ratio of 1:3). For monolithic casting, use only non-absorbent or minimally absorbent formwork, and treat it beforehand with formwork oil. In reinforced concrete structures, ensure that metal components have a sufficient protective coating. On the surfaces of large structures, observe the spacing of expansion joints.
Application
:
Mix ВE in a clean container or mixer with cold, clean water to form a lump-free mass. Place the concrete evenly into the formwork, then compact, level, and finish the surface. Do not cover the building’s expansion joints with concrete. Use reinforcing mesh when pouring floors. Protect freshly poured surfaces from direct sunlight, precipitation, freezing, and strong winds; post-curing is recommended. The minimum optimal layer thickness for pouring floors is 40 mm. Poured surfaces are walkable and ready for tiling 24 hours after pouring.
• Fire resistance class: A1 (non-combustible)
• Aggregate size:
≤8 mm• Coverage: approx. 80 kg/m²
for a 40 mm thick layer• Compressive strength class: C
25/30• Shelf life: 12 months from the date of manufacture in the original packaging