Sakret PM-Super is a cement-lime plaster for plastering mineral substrates or for laying and grouting bricks and blocks in interior and exterior applications.
In addition, PM-Super is particularly suitable for plastering baseboards, walls, and ceilings in dry or damp indoor environments, as well as for overplastering substrates previously plastered with cement or lime-cement plasters.
PM-Super, a lime- and cement-based mortar, contains hydrophobic additives, has high mechanical strength, is gray in color, and offers good water vapor permeability and water repellency. Intended for manual application.
Surface Preparation
The substrate must be sound, dry, stable, and free of cracks. Clean the surface of loose, flaking, or detaching layers such as dirt, salts, dust, oil, or paint residues, etc. Roughen particularly dense and smooth surfaces beforehand. Prime highly absorbent substrates with Sakret BG or UG; prime dusty surfaces with Sakret TGW; prime smooth concrete surfaces and ceramic brick surfaces with Sakret QG. Cover areas not intended for plastering (metal surfaces, window frames, glass, etc.).
Application Procedure
: Mix the dry mix with cold water in a clean container until a uniform consistency is achieved; the mortar must be free of unmixed lumps. Let the mortar stand for approximately 3 minutes, then remix. Do not add water to a mixture that has begun to set! Apply the mixture to the substrate using a steel trowel or float to a layer thickness of 5 to 25 mm. For layer thicknesses over 25 mm, use a fiber mesh or glass fiber reinforcement in the mixture.