Sakret BF is a dry concrete mix with an anti-freeze additive, suitable for use in temperatures as low as -10°C. Suitable for various concrete casting applications (e.g., posts, monolithic elements, floors, etc.). Can be used for pouring heated floors.
BF is suitable for indoor and outdoor use and is water- and frost-resistant. Minimum layer thickness for floor casting is 40 mm. Aggregate size up to 8 mm. 2,000 kg of dry concrete = 1 m³.
Surface Preparation
The substrate must be stable, strong, and free of cracks. Clean the surface of loose surface layers, dust, oil, paint residues, etc. Treat particularly dense and/or smooth surfaces with an abrasive. Prime mineral substrates with Sakret UG primer (dilute with water at a ratio of 1:3). For monolithic casting, use only non-absorbent or minimally absorbent formwork; treat the formwork with formwork oil beforehand. In reinforced concrete structures, ensure that metal components have a sufficient protective coating. On the surfaces of large structures, observe the spacing of expansion joints.
Application Procedure
: Mix SAKRET ВF in a clean container or mixer with warm, clean water until a lump-free mass is formed. Place the concrete evenly into the formwork, then compact, level, and finish the surface. Do not cover the building’s expansion joints with concrete. Use reinforcing mesh when pouring floors. Protect freshly poured surfaces from direct sunlight, precipitation, freezing, and strong winds; post-curing is recommended. The minimum optimal layer thickness for pouring floors is 40 mm. Follow the requirements for working with cement mixtures in winter conditions! Poured surfaces are walkable and ready for tiling 24 hours after pouring.
• Compressive strength: C
25/30• Fire safety class: A1 (non-combustible)
• Aggregate size:
≤8 mm• Working temperature: -10 °C to
+25 °C• Coverage: approx. 80 kg/m²
for a 40 mm thick layer• Shelf life: 12 months from the date of manufacture in the original packaging