Sakret ZF is a masonry and plaster mix with an anti-freeze additive for exterior and interior use. Suitable for use in temperatures as low as -10°C.
ZF offers high mechanical strength and weather resistance; it is water-repellent, vapor-permeable, and easy to work with. Suitable for plastering chimneys and areas requiring high mechanical strength, such as baseboards. Can be used for building chimneys (excluding fireboxes). 1,600 kg of dry mix = 1 m³. Mix class M10.
Mix preparation
: Mix the dry mix with clean, warm water using a mixer until a uniform, lump-free mass is achieved; mixing time: 4–8 min. Do not add water to a mix that has begun to set! Optimal working temperature: -10°C to +25°C. Higher temperatures accelerate the setting of the mix; lower temperatures delay it. Protect the wall being laid from precipitation and other harmful weather conditions.
Masonry
Work
Bricks and blocks must be clean and dry. Apply the mixture to the masonry using a trowel. Jointing is performed during the laying process; the best-quality joints are achieved with a mixture that has set sufficiently. Do not move the masonry material after the mortar has adhered to it!
Plastering
The surface must be clean, sound, level, and dry. Fill cracks and holes. Old masonry and plaster surfaces must be cleaned with a sandblaster or high-pressure water jet. Remove flaking plaster and peeling paint; also clean any oily or other surfaces that prevent adhesion. Prime particularly smooth and low-absorbency surfaces with Sakret QG quartz primer or roughen them with an abrasive. Prime highly absorbent substrates with Sakret BG primer or Sakret UG primer concentrate (dilute with water in a ratio of up to 1:3). Sakret ZM is not suitable for overplastering surfaces previously plastered with lime or lime-cement plasters!
• Compressive strength class: M10 according to standard EN 998-2S IV•
Plaster class: CS IV according to standard EN
998-1• Fire resistance class: A1 (non-combustible)
• Aggregate size: up to 2 mm•
Shelf life: 12 months from the date of manufacture when stored in the original packaging