Sakret LH is a ready-to-use white finishing plaster for interior walls and ceilings in dry rooms. For applying in medium to thin layers (0–4 mm) to gypsum board, OSB panels, plywood, plaster, concrete, and painted surfaces. Also suitable for filling joints in combination with joint mesh.
LH has minimal shrinkage, is very easy to apply and sand, and does not produce dust. For manual application.
Surface Preparation
The substrate must be clean, sound, and dry, free of adhesive, plaster, and paint particles. Cover areas not intended for filling (metal surfaces, window frames, glass, etc.). Substrates must first be primed with SAKRET TGW deep primer, SAKRET BG construction primer, or SAKRET UG universal primer (dilute with water depending on the substrate). It is recommended to roughen previously painted surfaces.
Application:
Apply a layer of up to 1–3 mm using a putty knife. After drying, sand with 150–240 grit sandpaper. Apply a new coat to cover defects or unevenness. Drying time before applying the next coat is approx. 1 hour; 12 hours before painting. The temperature of the substrate and the ambient air during application and drying must be between +10°C and +25°C, and relative humidity must not exceed 80%. Excessively high or low air temperatures and drafts indoors may cause the putty layer to dry improperly.
• Composition: Polymer binders, dolomite and quartz fillers, water-based
• Coverage (1 mm layer): approx. 1.7 kg/m²
• Drying time: (for a 1 mm layer) 1–1.5 hours
• Appearance: white paste-like mass
• pH: 11–13
• Shelf life: 12 months from the date of manufacture in unopened packaging; protect from cold!