Sakret HM-10 is a restoration plaster for walls and ceilings in both exterior and interior applications. A lime-cement plaster with good plasticity for restoration and plastering new buildings. Suitable for overplastering weak and porous substrates and existing plaster, as well as for plastering limestone.
HM-10 has a grain size of up to 1 mm, is gray in color, and is based on a lime and cement binder with high water vapor permeability. The cement content in the mixture is 8%. Suitable for use on mineral substrates (bricks, blocks, concrete, natural stone) as well as on wood surfaces and mineral wool plasterboards. Suitable for application with a plaster pump or by hand. Plaster class CS II.
Surface Preparation
The substrate must be sound, dry, stable, and free of cracks. Clean the surface of weak, loose, and flaking layers such as dirt, salts, dust, oil, or paint residues, etc. Roughen particularly dense and smooth surfaces beforehand. Prime highly absorbent substrates with Sakret BG or UG; prime dusty surfaces with Sakret TGW; prime smooth concrete surfaces and ceramic brick surfaces with Sakret QG. Cover areas not intended for plastering (metal surfaces, window frames, glass, etc.).
Application Procedure
: Mix the dry mix with cold water in a clean container until a uniform consistency is achieved; the plaster mortar must not contain any unmixed lumps. Let the mortar stand for about 3 minutes, then remix. Do not add water to a mixture that has begun to set! Apply the mixture to the substrate using a plastering pump, steel trowel, or plastering float to a layer thickness of 5 to 12 mm (up to 20 mm on stable surfaces). For layer thicknesses over 20 mm, use galvanized steel mesh in the mixture. Level the surface with a straightedge, trowel, or plastering trowel. Plastered surfaces can be finished with a plastic, rubber, or stone float. The plastered surface can be finished after at least 24 hours. It can be painted after at least 14 days. Plastered surfaces can be finished with Sakret decorative plasters and facade paints. Optimal substrate and ambient temperatures during application are +5°C to +25°C; avoid temperatures higher than +30°C and sub-zero temperatures.
• Compressive strength: ≥2.5 N/mm² (plaster class CS II)
• Adhesion strength: ≥0.40
N/mm²• Fire rating: A1 (non-combustible)
• Single-coat thickness:
5–20 mm• Particle size:
≤1 mm• Coverage: approx. 14.5 kg/m² for a 10 mm layer thickness•
Shelf life: 12 months from the date of manufacture