TKL fiberglass joint tape is used to join the seams of drywall panels. First, a thin layer of joint compound is applied to the drywall seam, then the tape is pressed firmly into the seam using a joint knife. Once the joint compound has dried, apply another coat of joint compound over the joint. Allow the joint compound to dry, then sand it smooth. If necessary, repeat the filling and sanding process a few more times. It is not recommended to apply the tape to a joint without joint compound (adhesive). The joint tape is white, measuring 50 mm x 20 m.
Material: 70% glass fiber, 30% acrylic adhesive
Mesh size: 2.85 mm x 2.85 mm
Tensile strength (warp): 580 N/50 mm
Tensile strength (weft): 750 N/50 mm
Fabric weight: 65 g/m² ± 3
Application temperature: 10 to 45°C