Kiilto Pro J is a water-based, ready-to-use joint tape compound for dry indoor spaces. It is suitable for securing joint tape to drywall, leveling walls and ceilings, and finishing the substrate before painting or wallpapering. Joint tape can be installed by hand or with a special tool.
• Layer thickness: max 2 mm
• Application conditions: normal indoor conditions, minimum application temperature 10°C
• Drying rate: approx. 1–2 h/mm (18°C)
• Maximum particle size: < 0.2 mm
• Adhesion strength: > 0.3 MPa (EN 15824)
• Binder type: polymer-limestone-based plaster
• Color: light gray
Instructions for use: The surface to be plastered must be clean, dry, and free of dust. A new layer may only be applied once the previous one is dry. If necessary, carefully sand and clean the surface before applying a new layer. After prolonged storage, stir the product thoroughly before use. If necessary, the product may be diluted with water.
Applying joint tape: Apply joint compound to the joint and press the tape firmly against the compound using a narrow-bladed putty knife. Then apply a second layer of joint compound over the tape and smooth it with a wide-bladed putty knife. The dried surface can be easily sanded if necessary. If the drywall does not have tapered edges, smooth the joint compound evenly beyond the edge of the joint to achieve a smooth surface. In this case, the edges of the drywall should be cut at an angle. Joint tape can also be applied to the drywall using a special tool.
Storage: In unopened original packaging, at a temperature above +1°C, for 1 year.
Safety: Avoid skin contact with the product before it dries; wear protective gloves.