Sadolin Maxi is a ready-to-use, fine-grained interior putty. The product is easy to apply and works well, making it suitable for both spot repairs and for filling walls and ceilings over a large area. It adheres well to the substrate, dries quickly, and leaves a strong layer of filler on the surface. Available in a wide range of package sizes. Suitable for filling plaster, concrete, lightweight concrete, and brick surfaces, as well as drywall and fiberglass wallpaper, for interior use in dry rooms.
• Application: dry indoor areas
• Binder: copolymer latex
• Particle size: < 0.1 mm
• Drying time: (23°C, 65% RH) 2–3 hours for a 1 mm layer of filler
• Thinner: water
• Color: white
• Application tool: putty knife
• Tool cleaning: with water immediately after use
• Storage: store in a sealed container in a dry and cool place (above +5°C)
Surface preparation: The substrate must be dry and free of dust, dirt, and grease. Use lukewarm or warm water to clean the surface; for heavily soiled surfaces, also use Cleaner. Remove old, flaking paint and loosely bonded surface layers down to a sound substrate. If the surface was previously coated with glossy paint, sand it with sandpaper to ensure better adhesion.
Filling: Apply Pahtel Maxi to the surface in one or more layers up to 3 mm thick. Before applying the next layer of filler, ensure that the previous layer has dried. Smooth the fresh filler as evenly as possible to minimize the amount of sanding required later. Reinforce joints and wider cracks with paper or fiberglass tape. Use fine-grit sandpaper (grit 150–180) to sand the filled surface. After sanding, carefully remove all sanding dust from the surface. Putty Maxi is ready to use. After prolonged storage, the putty may need to be stirred lightly. Do not mix other types of putty or dry mixes into the putty. Latex, alkyd, and acrylic paints are all suitable for painting over the puttied surface.
Cleaning: Remove excess putty from tools immediately after finishing work; wash with water.
Storage: Store in a sealed container in a dry and cool place (above +5°C).
Health and Safety Precautions: When applying the putty and sanding the surface, follow all safety precautions; use a respirator, wear eye or face protection, and ensure the work area is well-ventilated. When finished, carefully seal the putty container. Remove excess putty before cleaning tools. Do not pour the product down the drain or into bodies of water. Dispose of liquid putty residues at a collection point for hazardous materials; only completely emptied containers should be sent for waste disposal.