Sakret KSP is a silicate primer for mineral surfaces, used as a primer before painting with silicate paint or for impregnation before applying mineral plasters. Also serves as a dust barrier. For interior and exterior use.
KSP is a ready-to-use solution that improves paint adhesion and evens out the absorbency of the substrate. Highly vapor-permeable, UV-resistant, and environmentally friendly. Milky in color, becomes transparent when dry, matte finish, cannot be tinted.
Also
suitable for surfaces previously painted with lime, lime-cement, cement, and silicate paints.
Surface Preparation
:
Clean the surface of dirt, flaking and loose particles, and oil. Cover areas not intended for painting (metal surfaces, window frames, glass, etc.). Do not use on surfaces previously painted with alkyd, acrylic, latex, or silicone paints.
Application Procedure
Fresh concrete surfaces may be primed and painted only 2–4 weeks after the completion of concrete work. The surface and air temperature must be at least +5 °C during priming and drying, and relative humidity must not exceed 80%. Do not prime in direct sunlight or during rain or strong winds. Depending on the substrate, dilute the primer with water in a ratio of up to 1:4; use a thinner solution for less absorbent surfaces and a 1:1 ratio for highly absorbent surfaces. Apply to the surface using the “wet-on-wet” method with a brush or paint roller in a single coat, using as much as the surface can absorb. Do not take breaks longer than 5 minutes during priming to avoid streaks and spots that may result from drying. Drying time at 23 °C and 50% relative humidity is 12 hours.
• Chemical composition: Potassium silicate solution, polymer aqueous dispersion,
additives• Density: 1.05–1.07
g/cm³• pH:
10–12• Dry residue: Approximately
15%• Volatile organic compounds (VOC): 6
g/l• Coverage rate: 0.05–0.2
l/m²• Shelf life: 24 months from the date of manufacture when stored in a tightly sealed container.