Hunton Bitroc are 12 mm thick, bitumen-impregnated fiberboards. The panels are designed for use as a wind barrier in wood-frame structures and are coated on one side with a layer of bitumen-impregnated, ultra-high-density paper, which makes the panels airtight and their surface water-repellent. In the production of Hunton Bitroc, as many recycled materials as possible are used as raw materials. Standard panels measuring 1200 x 2700 mm have right-angled edges on all four sides. Other sizes are also available, as well as panels with a half-round edge on the long side.
Applications
:
Hunton Bitroc wind barrier panels are designed for use as a combined covering and breathable layer with thermal insulation in wood-frame construction.
Strength
Hunton Bitroc panels measuring 1200 x 2700 mm with square edges ensure sufficient wind resistance for walls and roofs in standard, up to two-story wood-frame houses, provided that the panel installation requirements are followed. Panels installed in this manner add rigidity to the building’s structure.
Fire-related properties
:
The panels are classified as Class F according to EN 13501-1.
Moisture and Weather Resistance Properties
The panels meet the requirements recommended by SINTEF regarding the water vapor resistance and airtightness of the breathable layer.
Thermal Insulation
The thermal conductivity of the panels is shown in Table 1. Compared to the use of roll products or thin boards as a breathable layer, Hunton Bitroc has U-values that are approximately 0.02 W/m² K lower for exterior walls with a wood frame, where the thermaltransmission ranges from 0.23 to 0.32 W/m² K. For walls with U-values ranging from 0.14 to 0.22 W/m² K, the corresponding reduction is approximately 0.01 W/m² K.