We apologize, but we inform you that the desired product is currently temporarily out of stock due to high demand. However, we offer excellent alternatives from the same product category , which can bring you just as much joy! But your shopping pleasure doesn't have to end here - you can continue your research by returning to the homepage or use our powerful search function to discover even more great options. Happy shopping!
• Cement-based, glass-fiber-reinforced dry concrete mix. • For repair work and small-scale casting projects indoors and outdoors. • Suitable for casting floor surfaces and sidewalk slabs, grouting concrete panels, repairing casting defects, and leveling baseboards. • 14-day return policy.
Delivery is not possible
A cement-based, glass-fiber-reinforced dry concrete mix for repair work and small-scale casting projects, both indoors and outdoors. Suitable for casting floor surfaces and sidewalk slabs, grouting concrete panels, repairing casting defects, and leveling baseboards (recommended layer thickness 5–80 mm).
Mix Preparation
: Combine the dry concrete mix with the required amount of clean, cool water. Slight variations in the amount of water are permissible to achieve the desired consistency for the job. Adding too much water to the mix may reduce compressive strength. Mix the mixture in a concrete mixer or by hand using an electric mixer or trowel until a uniform consistency is achieved. Allow the mixture to rest for 3 minutes, then stir it lightly once more. Working temperature: +5° to +30°C. Setting time depends on layer thickness, humidity, and temperature. The mixture is walkable after 24 hours (at +20°C and 50% relative humidity). The ready-mix must be used within 60 minutes.
Application Procedure
: Pour the concrete mix evenly onto the prepared substrate in strips, starting from the farthest edge. Spread the poured mix with a long trowel to the desired layer thickness. There should be no long intervals between pours (no more than 60 minutes). For leveling work, a layer thickness of 5–80 mm is recommended.
The mixture can be used to cast other elements on the construction site, but the necessary formwork must be completed beforehand. The mixture can also be used to cast lightly loaded support posts (greenhouses, terraces, etc.) or to secure fence posts.
To repair defects or perform touch-ups, mix the required amount of the mixture and apply it with a trowel or putty knife as a leveling layer to a horizontal or vertical surface. When filling corners and recesses, use support forms if necessary.