Kiilto Max Repair Filler is a water-based coarse-grained filler. It is suitable for filling holes in concrete, plaster, and leveling compound on walls and ceilings in dry rooms. If necessary, Kiilto Max can be smoothed with a fine filler before painting or wallpapering. We recommend painting the substrate before wallpapering; this makes it easier to replace the wallpaper in the future. Meets the requirements of standard EN 15824:2009.
• Layer thickness: 25 mm for holes (apply two layers if necessary)
• Drying time: 1–2 days
• Application conditions: normal indoor conditions; minimum application temperature 10°C
• Coverage: one tube covers approximately 0.4 m² (1 mm thick layer) or approximately 600 small holes (10 mm x 10 mm x 5 mm).
• Adhesion strength: > 0.3 MPa (EN 15824)
• Color: gray
Instructions for use: The surface to be filled must be clean, dry, and free of dust. A new layer may only be applied once the previous one is dry. If necessary, sand the surface before applying the next coat and carefully remove all sanding dust. Apply the filler to the surface using a metal putty knife. Apply two coats to deep holes. The dried surface can be easily sanded after 2–3 hours.
Storage: Store unopened in the original container at a temperature above 1°C for up to 1 year.
Safety: Avoid contact with skin while the product is still wet; wear protective gloves.