Kiilto Medium Renovation Filler is a water-based, ready-to-use filler for finishing dry interior walls and ceilings. It adheres well even to painted surfaces. It is suitable for finishing drywall and other building panels, as well as surfaces treated with concrete, plaster, and leveling compounds. The filler is also suitable for securing joint tape and for repairing scratches and holes up to 5 mm in size. Meets the requirements of standards EN 13963:2005 and EN 15824:2009.
• Layer thickness: 3 mm, 5 mm in holes
• Drying time: 1–2 h/mm
• Application conditions: normal indoor conditions, minimum application temperature +10°C
• Coverage: One tube covers approximately 0.4 m² (1 mm thick layer) or approximately 600 small holes (10 mm x 10 mm x 5 mm).
• Adhesion strength: > 0.3 MPa (EN 18524)
• Color: light gray
Instructions for use: The surface to be plastered must be clean, dry, and free of dust. A new coat may be applied only after the previous one has dried. If necessary, sand the surface before applying the next coat and carefully remove all sanding dust. Can be sanded again after 2–3 hours. We recommend painting the substrate before wallpapering; this makes it easier to replace the wallpaper later.
Storage: Store unopened in original packaging at a temperature above 1°C for up to 1 year.
Safety: Avoid skin contact with the product while it is still wet; wear protective gloves.