Finnfoam FF-PIR 30 SAUNA is a thermal insulation board that is particularly suitable for use in saunas and areas where heat and moisture are generated. FF-PIR panels have a core of rigid polyisocyanurate (PIR) foam, with both sides covered in multi-layer aluminum foil. The operating temperature range for FF-PIR insulation is –50 to +120°C, but the insulation can withstand peak temperatures of up to +200°C.
FF-PIR 30 SAUNA insulation panels measure 30 x 600 x 1200 mm.
The panels are installed directly onto the wall’s frame structure. The product is suitable for use on both wood-frame and brick walls.
Polyisocyanurate insulation materials have a very low thermal conductivity coefficient (λD = 0.022 W/mK). As a result, more effective insulation can be installed; compared to other insulation materials, a layer half as thick is sufficient. Since the aluminum foil layer acts as a vapor barrier, the structure must be particularly airtight.
Advantages of FF-PIR:
• Excellent thermal insulation properties, λD = 0.022 W/mK•
Compared to other insulation materials,
a layer half as thick is sufficient to achieve the same insulation performance• Exceptionally high water vapor tightness•
Due to the material’s light weight, the structure is subjected to less load (30 kg/m³)
• Easy to install•
Dimensional
stability•
Durability• Does not emit particles or
gases harmful to health• Increases the building’s usable floor
area• Environmentally sustainable lifestyle