Sadolin Snickeri is a ready-to-use wood filler for interior use. It has a fine grain, adheres well to wood, and leaves a very smooth surface after sanding. The product is easy to apply, works well, and dries quickly. Suitable for filling new and previously painted wood surfaces in dry indoor areas.
• Application: dry indoor areas
• Binder: copolymer latex
• Particle size: < 0.1 mm
• Drying time: (23°C, 65% RH) 3 hours for a 1 mm putty layer
• Thinner: water
• Color: white
• Application tool: putty knife
• Cleaning tools: with water immediately after use
• Storage: store in a sealed container in a dry and cool place (above +5°C)
Surface preparation: The substrate must be free of dust, dirt, and grease. Ensure that the wood is dry, with a moisture content below 18%. To clean the surface of dirt, use lukewarm or warm water; for heavily soiled surfaces, also use Cleaner. Remove old, flaking paint down to a solid substrate; if the surface was previously coated with glossy paint, sand it with sandpaper to improve adhesion. Remove resin from knots mechanically or with a cloth soaked in paint thinner, then varnish the knots with knot varnish. Sand the sharp edges of wooden details with sandpaper to make them rounded. Prime previously unpainted wooden surfaces with Master Base or Bindo Base before filling.
Filling: Apply Snickeri filler to the surface in one or more layers up to 2 mm thick. Before applying the next layer of filler, make sure the previous layer has dried. Smooth the fresh filler on the surface as evenly as possible to minimize the amount of sanding required later. Use fine-grit sandpaper (No. 150–180) to sand the filled surface. After sanding, carefully remove all sanding dust from the surface. Snickeri filler is ready to use. After prolonged storage, the putty may need to be stirred lightly. Do not mix this putty with other types of putty or dry mixes. Both acrylic and alkyd paints are suitable for painting over the puttied surface.
Cleaning: Remove excess putty from tools immediately after finishing work; wash with water.
Storage: Store in a sealed container in a dry and cool place (above +5°C).
Health and Safety Precautions: When applying putty and sanding the surface, follow all safety precautions; use a respirator, wear eye or face protection, and ensure the work area is well-ventilated. When finished, carefully seal the putty container. Remove excess putty before cleaning tools. Do not pour the product down the drain or into bodies of water. Dispose of liquid putty residues at a collection point for hazardous materials; only completely emptied containers should be sent for waste disposal.