Sakret BE-FIX is a fast-setting concrete suitable for various concrete casting applications (e.g., posts, monolithic elements, floors, etc.). It can be used for casting heated floors. The floor is walkable after 6 hours.
BE-FIX is suitable for indoor and outdoor use. Water- and frost-resistant. Minimum layer thickness for floor casting is 40 mm. Aggregate size up to 8 mm. 2,000 kg of dry concrete = 1 m³.
Surface Preparation
The substrate must be stable, strong, and free of cracks. Clean the surface of loose surface layers, dust, oil, paint residues, etc. Treat particularly dense and/or smooth surfaces with an abrasive. Prime mineral substrates with Sakret UG primer (dilute with water at a ratio of 1:3). For monolithic casting, use only non-absorbent or low-absorbent formwork; treat the formwork with formwork oil beforehand. In reinforced concrete structures, ensure that metal components have a sufficient protective coating. On the surfaces of large structures, observe the spacing of expansion joints.
Application Instructions:
Mix SAKRET ВE-FIX in a clean container or mixer with cold, clean water until a lump-free mass is formed. Place the concrete evenly into the formwork, then compact, level, and finish the surface. Do not cover the building’s expansion joints with concrete. Use reinforcing mesh when pouring floors. Protect freshly poured surfaces from direct sunlight, precipitation, freezing, and strong winds; post-curing is recommended. The minimum optimal layer thickness for pouring floors is 40 mm. Poured surfaces are walkable 6 hours and ready for tiling 12 hours after pouring.
• Compressive strength after 2 days: ≥ 12 N/mm²
• Compressive strength after 7 days: ≥ 20 N/mm²
• Compressive strength after 28 days: ≥ 28 N/mm²²
• Fire safety class: A1 (non-combustible)
• Aggregate size: ≤8 mm
• Coverage: approx. 80 kg/m² of dry mix for a 40 mm thick layer
• Shelf life: 6 months from the date of manufacture in the original packaging