The Bosch Tronic 6000T is a 150-liter water heater that can be installed either vertically or horizontally. Power: 2,400 W.
Features
: - Dry heating element (heating coil)
- Can be installed either vertically or
horizontally - Efficient 32-mm thermal insulation made of high-density compressed polyurethane, which ensures minimal heat loss and economical operation-
Glass-ceramic coating provides reliable protection against corrosion and ensures high water purity. The coating guarantees a long service life and continuous operation of the water heater.
-
Magnesium anode - Flange that ensures easy removal of scale from the tank and easy access to the
electric heating elements -
Safety valve - Stainless steel hot water outlet
- The tank is covered by a 5-year warranty
. Rapid water heating thanks to a powerful heating element
.
Depending on the model, the heating element has a power output of 1.6–2.4 kW. As a result, it takes one and a half to three and a half hours to heat water from 15 °C to 65 °C, depending on the Bosch Tronic model and capacity. All models are equipped with a thermometer that displays the hot water temperature in the tank.
Dry heating element
In Bosch Tronic 6000T models, the electric heating element is located inside the cylinder, and any impurities in the water settle on the cylinder rather than on the heating element. As a result, the heating element has a longer service life because it is not in direct contact with the water. If the heating element fails, it can be quickly replaced, as there is no need to unscrew the cap or drain the water, as is the case with conventional heating elements.
Capillary
Thermostat It consists of a tube located inside a capsule filled with a liquid that reacts to water temperature. As the capsule heats up, the liquid inside expands and exerts pressure on the contacts, thereby interrupting the water heating process. A capillary thermostat is much more accurate than standard thermostats. Its accuracy is ±3 °C. Temperature control is managed by a mechanical regulator located on the boiler housing.
Anti-Freeze Mode
The minimum recommended room temperature is 0 °C. However, to prevent the water in the tank from freezing, the tank must be emptied for the winter or the anti-freeze mode must be used. Anti-freeze mode means setting the thermostat to 10 °C. This way, the thermostat maintains the water temperature in the tank at 10 °C during the winter, while keeping electricity consumption to a minimum.
The tank has an antibacterial glass-ceramic coating
on the inside. All Bosch Tronic electric water heaters are coated on the inside with a unique glass-ceramic material developed in Bosch’s laboratory. This glass-ceramic is a glass-like substance that has been tempered at high temperatures (780–850 °C) and applied to the inner surface of the tank. Its main difference from glass is that this coating can withstand fluctuations in pressure and temperature. At the same time, it is chemically completely neutral and ensures complete hygiene when heating water. This eliminates the risk of “bloom” in the water, and there is no need to drain the water heater when hot water is not in use.
Horizontal and Vertical Installation
Using the mounting plate included in the kit, the water heater can be installed either horizontally or vertically, depending on the installation location. The installation method does not affect the electric water heater’s operation.
High tolerance to
changes in system pressure The water heater tank has been factory-tested at 16 bar, which is twice the typical municipal water supply pressure.
Connections
: Standard 1/2-inch connections ensure easy installation of the water heater.
Larger magnesium anode for added protection against
corrosion: Corrosion is one of the most common problems with water heaters. That is why all Bosch Tronic electric water heaters in this series feature larger magnesium anodes. Corrosion is influenced by water quality and water heater maintenance. Maintenance must be performed by an authorized service partner once a year.
Minimal heat loss thanks to unique 32 mm thermal insulation
Thanks to Bosch Tronic’s unique thermal insulation, heat loss is 0.8–1.5 kW per day. When the temperature drops below a set level, the water begins to heat up. The electric heating element heats the water to the set temperature and then shuts off via the thermostat. This autonomous heating mode consumes very little electricity. As a result, the water is always heated to the desired temperature.
Warranty
The tank comes with a 5-year warranty. The warranty period for the electronics and other boiler components is 2 years.