BACHO CARTRIDGE AND ACCESSORY SET, 91 PIECES

Bahco set of sockets (4–32 mm), bits, and open-end wrenches (8–17 mm), 1/4" + 1/2", 91 pieces, Dynamic-Drive profile.

• Twelve 1/4"" hex sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, and 13
mm• Ten 1/4" deep hex sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12, and 13 mm•
Thirteen 1/2-inch hex sockets: 10, 11, 12, 13, 14, 15, 17, 19, 22, 24, 27, 30, and 32 mm•
Two 1/4"" extensions: 50 mm and 100 mm•
One 1/4"" sliding
T-handle• One 1/4"" universal joint•
One 1/4"" bit
holder• One 1/4"" bit
adapter• One 1/4"" screwdriver handle with a two-component
grip• One 1/4"" magnetic adapter•
Five 1/4"" socket bits: PH0, PH1, PH2, PH3, and
PH4• Three 1/4"" flat-blade socket bits: 4, 5.5, and 7 mm•
Three 1/4" socket bits: PZ1, PZ2, and
PZ3• Six 1/4" hex socket bits: 3, 4, 5, 6, 8, and 10 mm•
Eight 1/4-inch TORX® sockets: T8, T10, T15, T20, T25, T27, T30, and
T40• Three 5/16-inch TORX® bits: T45, T50, and
T55• Two 1/2-inch extensions: 125 mm and 255 mm•
One 1/2-inch universal joint•
One 1/2-inch spark plug hex socket, 21 mm (13/16-inch)
• One 1/2-inch × 5/16-inch bit
holder• One 1/2-inch T-adapter•
Three L-shaped hex wrenches: 1.5, 2, and 2.5 mm•
One 1/4-inch ratchet, quick-release, 60 teeth / 6° operating angle•
One 1/2"" ratchet, quick-release, 60 teeth / 6° operating angle•
Four combination wrenches: 8–9, 10–11, 12–13, and 14–15 mm•
Six open-end wrenches: 8, 10, 12, 13, 14, and 17 mm with removable holder•
One removable three-section plastic case
with a lid• Matte finish•
High-alloy
steel• Reduced wear and damage to fasteners thanks to the Dynamic-Drive™ profile chuck•
Body: high-density polyethylene (HDPE)
• Standards: ISO 1174 and DIN 3120