The Tycroc TWP12 construction panel is waterproof and water-blocking, meaning it does not allow water or moisture to pass through it. The panel is lightweight and easy to install (a 12-mm panel weighs approximately 3 kg/m²). The main advantages over today’s common construction solutions for damp spaces are simplicity and speed, as well as the fact that the product has closed pores (zero capillarity), meaning water cannot penetrate or pass through the material.
• The product is hydrophobic, meaning it is impervious to water, and does not require an additional waterproofing layer
• Real time and cost savings (eliminates the need to apply and allow waterproofing to dry)
• Easy to install
• Easy to transport and lift (for example, when moving between different floors or rooms)
• Durable both during construction and once installed
• Very wide range of applications (can be shaped into various forms, such as curved walls, ceilings, and curved seats, etc.)
• Does not create dust or leave stains during processing or installation (no need for constant cleaning)
• Remains dust-free even after installation (an added benefit for people with asthma)
• Installation can be performed by a single construction worker—saving time and money
• Low flammability and does not emit toxic gases during combustion—Euroclass E fire resistance
• Guaranteed water and moisture resistance throughout (conventional waterproofing typically covers and protects only one side of the material)
• Moisture turns the popular building material, gypsum board, into a breeding ground for toxic fungi
Applications: The Tycroc TWP12 construction panel is ideal for use in bathrooms, steam rooms, spas, and swimming pools. The product is also suitable for so-called “dry” rooms. Its high tolerance for temperature fluctuations allows our solutions to be used in seasonally occupied buildings (such as summer homes, etc.) that remain unheated during the winter. The operating temperature range is from -50°C to +75°C.
The panel can be installed on various substrates and frames used in construction. It is primarily suitable for constructing partition walls and making them waterproof, building custom-shaped shower stalls and steam room benches, and fabricating work surfaces, shelves, etc. It is also suitable for waterproofing bathroom ceilings and floors, and can be installed directly under underfloor heating cables to simultaneously prevent heat loss downward. In addition, the panels are suitable for finishing window sills where there is a risk of condensation. The panels can and may also be used outdoors (on the foundation, facade, and window sills) provided that the extruded polystyrene (abbreviated as XPS foam) is protected from UV radiation—that is, covered with a finishing material (siding, stucco, facade panels).
Tycroc Waterproofing System: The Tycroc comprehensive waterproofing solution involves covering walls, floors, and ceilings with Tycroc TWP construction panels, as well as sealing the joints between panels, fastening washers, and corners with Tycroc Premium Fix adhesive sealant. Such a surface is hydrophobic and immediately ready for tiling or other types of finishing. Alternatively, the joints and corners can also be covered with a waterproofing tape and membrane.
Panel dimensions: 1.2 x 60 x 250 cm, 1.5 m².