Caparol Capatox is a ready-to-use biocidal solution for the pretreatment of surfaces covered with algae, moss, and mold, both indoors and outdoors.
On interior surfaces, be sure to brush or scrape off the layer of mold while it is wet (not dry), while complying with local laws and regulations (e.g., regulations on biological and hazardous substances). On exterior surfaces, wash areas covered with mold, moss, or algae with pressurized water, following the relevant guidelines. Remove plants and pollen mechanically or with pressurized water. Wash the cleaned surfaces with Capatox and then allow them to dry thoroughly.
Apply Capatox to the surface with a brush. Coverage is approximately 6–20 m²/l, depending on the roughness and absorbency of the substrate. Always apply Capatox undiluted. Clean tools with water.