The Essve concrete screw measures 50 x 7.5 mm. Each package contains 100 pieces.
The ECS concrete screw is an affordable option for simpler jobs where, for example, ETA certification is not required for the installation. This specially hardened screw is driven directly into a drilled hole without a anchor. The screw features a “hi-low” thread, which ensures good load-bearing capacity and simplifies installation. It is recommended to use an impact driver during installation. The concrete screw does not require a pre-tightening torque to secure the fastener, which means that once the screw has reached the substrate, any further tightening must be avoided. The final tightening torque must not exceed what is necessary to secure the object being fastened. The ECS concrete screw is fully hardened and is therefore sensitive to skewed screw-in. The drill hole must be at a 90-degree angle to the substrate. For the ECS concrete screw, it is not necessary to blow out the drill hole before installation, but the drill hole must be deep enough for the concrete screw to reach the correct installation depth regardless of any drilling dust that may remain in the hole.