Maston Hammer Silver Metal Paint, in which the anti-corrosive agent, primer, and topcoat combine to form a durable, glossy finish on all metal surfaces. Suitable for indoor and outdoor use. Can be applied directly to prepared surfaces, including rusty ones. The air- and moisture-impermeable paint film stops corrosion and effectively protects the metal surface. Also suitable for treating wooden surfaces. The coverage of the metal paint is approximately 5–6 m²/L, depending on the application and application method. Drying time is approximately 24 hours. Fully dry after 7 days and, if necessary, can be recoated within 2–8 hours or after 8 days (+20°C/24 h) only with paint of the same type, i.e., Maston Hammer paint. Preparation: Remove loose rust, loose paint, and flaking paint from the surface to be painted using a wire brush. Clean the surface of oils, greases, and all other contaminants. Allow damp surfaces to dry before painting. Stir the paint thoroughly before use. Also stir the paint during application. Application: With a brush—use a brush of suitable width and apply a thick, even coat of paint using cross-hatch strokes. To finish the surface, lightly brush the surface in the same direction. You can touch up the finish if necessary. With a roller—use a natural-fiber roller. Apply the paint evenly across the surface. If necessary, you can thin the paint with Hammer XYLENE thinner. When applying with a spray gun, thin the paint by 5–20%. Package size: 250 ml.