Knauf KTS is a 9.5 mm thick construction panel with a green-impregnated cardboard facing and a gypsum core, designed to cover the insulation material on the exterior side of stud-framed exterior walls, providing protection against wind and moisture, while allowing water vapor to escape into the outside air. The wind barrier gypsum board measures 1200 x 2700 mm and is 9.5 mm thick.
• EVS-EN 520 type EH2
• non-combustible A2-s1,d0
• reduced water absorption
• easy to work with, install, and finish
Wind barrier gypsum board is used on exterior stud walls to cover mineral wool insulation, thereby preventing cold air from entering the interior of the building structure.
A cladding system made of wind barrier gypsum boards must be covered with a ventilated, weather-resistant facade cladding.
Installation must be carried out in accordance with building codes and the instructions in the Knauf technical manual applicable to the selected structural solution.
The surface of the wind barrier gypsum boards must be covered with a ventilated facade cladding (siding, cement boards, metal panels, etc.) that protects the surface of the wind barrier gypsum boards from direct contact with precipitation. Wind barrier gypsum boards must not be finished (spackled, painted) or have insulation materials glued to their surface.