Turtle Wax HS Ceramic Polish & Wax 500 ml. A product for removing halos, scratches, and oxidation from the paint finish. Synthetic wax polymers provide an exceptional shine and gloss. Durable protection thanks to SiO₂ infusion. Water- and dirt-repellent coating. DIRECTIONS. Wash and dry the car. SHAKE the bottle THOROUGHLY. Do not apply to a hot surface. Do not use too much product—60 ml is the appropriate amount for one car. Apply by hand. Squeeze 3 small drops of the product onto a foam sponge and spread over a 60 x 60 cm area. Use light to medium pressure and overlapping circular motions. Wipe away any excess product with a microfiber cloth, using the clean side of the cloth for the final wipe. Next, use a damp microfiber cloth to activate the gloss polymers. If necessary, wipe the surface again with a dry microfiber cloth. Machine application. To treat a 60x60 cm surface, apply 4 small drops evenly to a medium-firm polishing pad. Apply the product to the surface using slow rotations. Switch the machine to high speed. Using light to medium pressure, work the surface with back-and-forth motions. Remove any excess with a microfiber cloth. Next, use a damp microfiber cloth to activate the gloss polymers. If necessary, wipe the surface again with a dry microfiber cloth. NOTE: Test the product on a small, inconspicuous area first. Do not use on rubber or vinyl surfaces, or on matte finishes. Allow the surface to dry for 24 hours before washing or applying a new coat of wax. Warning. Causes skin irritation. Causes serious eye irritation. Keep out of reach of children. Wear protective gloves. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and if they can be easily removed. Rinse again. If skin irritation occurs: seek medical attention. If eye irritation persists: seek medical attention.