WTF Extreme Tack White construction adhesive is suitable for bonding various building materials, such as wood, sheet metal, metal, concrete, cement, and stone surfaces, as well as various types of panels, such as drywall, plywood, wood fiberand wood-chip boards, glued laminated timber, tiles for wet areas, acoustic panels, furniture boards, MDF, OBS, etc. Allows for bonding automotive windshields and body parts. Suitable for bonding non-reinforced parts and for quick assembly work. Flexible, instantly load-bearing bonding for metals, e.g., in the construction of machinery and equipment. Can also be used with plastics and in ventilation and HVAC systems. Suitable metal surfaces: powder-coated, painted, galvanized, chrome-plated, or hot-dip galvanized. Suitable for wood, most plastics, stone, ceramics, and concrete. For materials and plastics that crack easily, test the product first. Also suitable for bonding the back surfaces of mirrors and glass. Avoid contact with adhesives and sealants from other manufacturers.
Usage:
Check the best-before date printed on the packaging (printed on the top of the cartridge, black on black).
Cut off the tip of the cartridge and screw the dispensing tip into place. Use the WTF® Cartridge Opener or a knife. Apply the assembly adhesive preferably using a sturdy glue gun and press the parts together. The included application tip is designed for bonding. A battery-powered or pneumatic glue gun is also suitable for application.
Depending on the surface to be bonded, the material’s thermal expansion, and mechanical stress, a glue layer thickness of 1–5 mm is recommended. It can also be used in automatic dispensing equipment.
Bonding. Apply the adhesive to the surface in strips or dots. Always apply adhesive to the edges of parts and the corners of panels.
Cleaning. Clean fresh stains with alcohol or isopropanol. Once dry, clean only mechanically.
Bonding and joining of parts must be completed within the working time (max. 10 min).
Compatibility with paints:
Can be painted over with standard water-based paints. Due to the specific properties of varnishes and paints, compatibility must always be checked in advance. The use of alkyd resin-based paints may slow down the drying of the adhesive. For best results, apply the paint to the dried adhesive. Fully cured adhesive may be exposed to higher temperatures for short periods (e.g., during powder coating).
Chemical resistance:
Good: against water, aliphatic solvents, oils, grease, diluted inorganic acids, and alkalis.
Moderate: Resistant to esters, ketones, and aromatic compounds.
Poor: Concentrated acids and chlorinated hydrocarbons.
Ideal applications:
Heavier-duty fastening applications requiring immediate adhesion (all materials, sealing).
For construction panels, stone slabs, moldings, mirrors, and other complex fastening applications.
Also suitable
for:
Bonding smaller or lighter components, e.g., hooks, grates;
Sealing, when no product better suited for sealing is available.
Limitations:
Primarily intended for bonding, not for sealing or filling joints.
Not suitable for swimming pools or glazing
. Not suitable for the following materials: PP, PE, PTFE (Teflon), bitumen.
For indoor and outdoor use.
Operating temperature: +5 °C to +40 °C.
Curing time: 2 mm/24 h.
Temperature resistance: -40 °C to +95 °C.
Use Extreme Tack with WTF silicone tube caps to keep the product fresh longer.