The Alfa Term 35 central heating stove is a wood-fired, water-jacketed central heating stove designed for cooking, baking, and heating rooms. Its rated output is 32.6 kW, of which 22.3 kW is transferred to the water and 10.3 kW to the room.
Color: white. Configuration: left-handed.
Handedness is determined when viewed from the front: on a right-handed model, the cooking stove and flue connection are on the right and the firebox is on the left; on a left-handed model, the layout is mirror-image.
Manufacturer’s model number: Alfa Term 35
Rated output: 32.6 kW
Heat output to the room: 10.3 kW
Heat output to the water jacket: 22.3 kW
Efficiency: 76%
Energy class / EEI: A / 102
Seasonal energy efficiency: 67%
Dimensions (L x W x H): 1100 x 600 x 850 mm
Stove dimensions (L x W x H): 460 x 440 x 260 mm
Water jacket capacity: 32 L
Maximum operating pressure: 1.9 bar
Flue pipe diameter: Ø 160 mm
Flue gas temperature: 264 °C
Flue gas temperature at the outlet: 317 °C
Chimney draft: 20 Pa
Flue gas mass flow: 37.9 g/s
Net weight / gross weight: 211 / 241 kg
Fuel: firewood, moisture content <25%
Operation: only with the firebox door closed; intermittent operation
Emissions at 13% O₂: CO 1,150 mg/Nm³, PM 27 mg/Nm³, OGC 84 mg/Nm³, and NOx 88 mg/Nm³.
Safety clearances from combustible materials: 300 mm to the rear, 400 mm to the sides, 1,500 mm to the front, 1,500 mm in the direction of lateral heat radiation, and more than 750 mm upward.
The floor protection must extend at least 500 mm in front of the stove and 100 mm to the sides. The installer is responsible for proper installation and connection; the heating system, pressure relief, and overheating protection solutions must be designed and installed by a qualified specialist. The maximum operating pressure is 1.9 bar or the lower limit specified on the unit’s nameplate; the set pressure of the pressure relief valve must not exceed this value.
Connection to a masonry wall requires consultation with a specialist and may only be performed at the consumer’s own risk.