ALFA 70 WOOD-BURNING STOVE WITH GLASS DOOR, BEEZ RIGHT, 7.6 kW

The Alfa 70 is a wood-burning stove with a glass firebox door, a cooktop, and an oven for cooking, baking, and heating a room. The stove does not have a water jacket. Factory model number: Alfa 70 DOMINANT.

The stove’s handedness is determined by looking at the front: on a right-handed stove, the oven and flue connection are on the right and the firebox is on the left; on a left-handed stove, the layout is reversed.

Rated power: 7.6 kW
Efficiency at rated power: 84.8%
Seasonal heating energy efficiency: 74.8%
Energy class: A+
Energy Efficiency Index (EEI): 112.9
Dimensions L x W x H: 700 x 650 x 850 mm
Net weight: 120 kg
Flue connection diameter: 120 mm
Required chimney draft: 12 Pa
Flue gas temperature: 179 °C
Flue gas outlet temperature: 215 °C
Flue gas mass flow: 7.88 g/s
Operation: with closed firebox door; intermittent heating
Fuel: dry, unprocessed firewood. Follow the user manual regarding the dimensions, moisture content, and quantity of firewood. The size of the heated space depends on the building’s heat loss.

The unit complies with the requirements of EN 16510. Emissions at 13% O₂: CO 710 mg/Nm³, PM 28 mg/Nm³, OGC 65 mg/Nm³, and NOx 116 mg/Nm³.

Safety distances from combustible materials: 400 mm to the rear; 400 mm to the sides; 750 mm to the front; more than 750 mm upward; 400 mm in the lateral radiation zone. The floor protection area in front of the stove must be at least 300 mm. Under the appliance: 0 mm; the floor protection requirement still applies. Also comply with any stricter local requirements.

For floor clearance and all other safety distances, follow the installation instructions. The installer is responsible for proper installation and connection. Have a qualified specialist assess the suitability and draft of the chimney. Follow local requirements and the data plate of the specific appliance.

Connection to a masonry chimney requires consultation with a specialist and may only be performed at the consumer’s own risk.