The Wilo Atmos Pico circulation pump is electronically controlled. It is a maintenance-free, threaded-connection centrifugal pump with a wet rotor, featuring a stall-proof synchronous motor based on ECMtechnology and integrated electronic power control for stepless pressure differential regulation. The pump is suitable for use in all heating and cooling systems. Thanks to its simple control panel and standard design, the Wilo-Atmos PICO is the ideal circulation pump for small residential buildings.
Preselectable control modes for optimal load adaptation:
• Variable pressure difference (Δp-v) with 3 preset operating characteristics.
• Constant speed (3 constant speed levels).
• LED indicator for the selected control mode.
• LED indicator for the selected operating characteristic within the control mode.
Status indicator:
• In normal mode, the LED lights up green; in case of a fault, the LED lights up or flashes.
• Minimum power consumption of only 4 W.
• Integrated motor protection.
• Automatic unblocking function.
• High starting torque.
• Pump housing made of gray cast iron, impeller made of polypropylene, stainless steel shaft with metal-impregnated carbon slide bearings.
Operating data:
• Liquid temperature min/max -10 °C / 95 °C.
• Ambient temperature min/max -10 °C / 40 °C.
• Maximum operating pressure PN 10 bar.
Motor specifications:
• Energy Efficiency Index (EEI) * ≤0.20.
• Power supply 1–230 V ±10%, 50/60 Hz.
• Rated power P2 15 W.
• Rotational speed min 700 1/min / max 3400 1/min.
• Power consumption P1 min 4 W / 20 W.
• Emitted disturbances EN 61000-6-3.
• Immunity to disturbances: EN 61000-6-2.
• Electromagnetic compatibility: EN 61800-3.
• Insulation class F, protection class IPX2D.
• Cable thread connection: 1 x PG11.
Installation dimensions:
• Pipe connection on the suction side: DNs G 1½.
• Pipe connection on the discharge side: DNd G 1½.
• Installation length L0: 180 mm.
• Net weight: approximately 1.8 kg.