Rilak Pentaprim is a weather-resistant, glossy alkyd enamel for exterior and interior use. Intended for painting wood and primed metal surfaces.
For pre-priming steel surfaces exposed to outdoor conditions, use primers GF-021, NOVAKOR, NEOSPRINT PRIMER, or RIATOP PRIMER; for aluminum and galvanized surfaces, use VL-02 or NEOSPRINT PRIMER as a primer. It is recommended to first prime wooden surfaces exposed to outdoor conditions with the colorless wood preservative TEKSTURDEKOR. Stir the enamel thoroughly before use. If necessary, thin the paint with up to 0–4% by volume of white spirit or VAITSOL solvent to achieve the desired viscosity for application by roller or brush. Spray priming is permitted only in designated areas. During application and drying, the air temperature must not be lower than +5°C, and relative humidity must not exceed 85%. Apply 1–2 coats to clean, dry surfaces using a brush, roller, spray gun, or airless sprayer (nozzle diameter 0.011″–0.017″). Drying time at a temperature of (20±2)°C and relative humidity not exceeding 50%—no more than 24 hours. Coverage per coat—9–11 m²/L.
Store in a tightly sealed container at a temperature above 0°C.