The ECOVACS GOAT O1200 LiDAR PRO brings full automation to lawn care. It is suitable for lawns up to 1,200 m². The TruEdge trimmer ensures edge-to-edge results. The HoloScope 360 system navigates with 2-cm precision both day and night. You’ll enjoy a consistent cut, high efficiency, and flexible settings—from cutting height to no-go zones.
ECOVACS’ first robotic lawn mower
with an integrated trimmer. The integrated TruEdge trimmer enables completely hands-free mowing, even along the edges. The device covers the entire perimeter. No manual touch-ups are needed. The trimmer cuts the edges automatically and precisely.
Fully automatic AI-powered TruEdge trimmer
The TruEdge trimmer uses rapidly rotating elastic blades. This ensures a clean cut and removes even complex edges. An AI camera distinguishes grass from other surfaces in real time. The robot decides whether to drive slightly over the edge for a zero-edge cut or to mow precisely along the boundary. The result is clean edges and minimal manual work.
Adapting to terrain and obstacles
, the GOAT O1200 LiDAR PRO operates along straight edges, curves, and irregular corners. The system detects over 200 types of obstacles. The robot mows closely around stationary objects. When near people or animals, it stops the mower blades from rotating. This protects your property and loved ones.
HoloScope 360 Dual-LiDAR Navigation
Setup takes about one minute. The system maps the area in a single pass. The 360-degree rotating LiDAR and 3D ToF LiDAR work together with an AI camera. The result is a detailed map with 2 cm accuracy across the entire lawn, even in the dark. The front 3D ToF LiDAR detects obstacles even in challenging conditions.
AIVI 3D Obstacle Avoidance
AI Vision and 3D ToF LiDAR help avoid over 200 obstacles, including hedges. The robot can navigate around obstacles at a distance of approximately 5 cm. This minimizes uncut areas and maintains a safe distance.
Navigating
Narrow Passages The compact design and smart edge detection allow it to navigate paths up to 0.8 m wide. According to laboratory tests, the device can navigate a 0.8 m wide passage. Actual results depend on the grass and terrain.
Navigating
slopes and obstacles The device operates on slopes of up to 45 percent, or 24 degrees. It can climb over obstacles up to 3 cm high and ensures consistent mowing even on challenging terrain.
Efficient Route Planning
Advanced algorithms automatically calculate the most efficient mowing routes. The robot operates along curved and sloped edges, in narrow strips, and in areas with obstacles. This reduces overlapping areas and increases coverage.
High mowing efficiency
: The GOAT O1200 LiDAR PRO offers up to 150 percent greater maximum cutting capacity compared to standard robotic mowers. Data is based on ECOVACS laboratory tests. Actual performance may vary.
Cutting height: 3 to 8 cm
The cutting height can be adjusted from 3 to 8 cm in 1-centimeter increments. Adjustments are made electronically via the app.
Scheduling and Multi-Zone Management
: With the Map Editor, you can add, merge, or delete zones. You can set separate mowing frequencies for different zones according to your schedule.
Instant Setup and Automatic Mapping
InstantGo and HoloScope 360 let you get started in about one minute. The device detects and saves boundaries without the need for physical wires. No further setup is required after the initial mapping. Press “Start” and the robot begins working. You can use the remote control for manual mowing or to monitor the area.
IPX6 Water Resistance
IPX6 protection ensures reliable operation in challenging conditions. Simply rinse it off to clean.
Technical specifications:
• Color: white•
Battery: Li-Ion, 5200 mAh, 107.3 Wh•
Charging time: 70 min•
Package dimensions: 740 x 530 x 350 mm•
Robot dimensions: 600 x 479 x 304 mm,
without trimmer• Charging station dimensions: 706 x 430 x 285 mm•
Navigation: Dual LiDAR + AI camera•
Noise level: 61 dBA, 81
dBA with TruEdge trimmer• Obstacle detection: 3D ToF + AI camera + bumper
sensor• Mowing efficiency: up to 180
m²/h• Cutting blades:
1• Cutting width: 220 mm•
Cutting height: 3 to 8 cm, electronically
adjustable• Maximum incline: 45 percent, 24
degrees• Protection class: IPX6, charging station
IPX6• Charger operating voltage: 21 V•
Charger rated power: 63 W
Package includes:
• Robot with 3 blades, 1 pc•
Charging station with 10 m power cord, 1 pc•
Power adapter, 1 pc•
Trimmer module, 1 pc•
Charging station mounting pins, 6 pcs•
Hex key, 1 pc•
Spare blade set, 9 blades and 9 screws, 1 pc•
Quick start guide, 1 pc•
User manual, 1 pc