DAEWOO DAW 975 HIGH-PRESSURE WASHER

A professional pump with a crank and rod mechanism, designed for long-term and intensive use. The crankshaft operates in an oil bath, thereby extending the pump’s service life. This design ensures a flow rate of 700 l/h and a maximum pressure of 200 bar. The motor is characterized by a long service life, low noise level, high power, and compact dimensions. This ensures higher torque and up to 50% lower electricity consumption. No brush maintenance or replacement is required.

The flexible, durable rubber hose with a steel reinforcement does not break or kink. The 15-meter-long hose is long enough to comfortably wash every side of a car. The metal reel with an automatic rewind mechanism allows you to quickly pull out the hose to the desired length and wind it back up. The high-pressure washer included in the set is designed for stationary use—it can be mounted on a horizontal surface or attached to a wall (the mounting hardware needed for concrete walls is included in the set). If the pressure washer needs to be moved frequently from one location to another, we recommend purchasing the DAWK 90 transport kit.

The new trigger mechanism ensures comfortable operation with minimal trigger pressure, reducing hand fatigue during prolonged use. The QUICK LOCK system allows you to change nozzles with a single motion, without using threaded connections. The new 1-liter foam generator, featuring a brass mixing chamber and a metal foaming element, produces thick, long-lasting foam. The foam density and spray angle can be easily adjusted to achieve optimal results with various cleaning agents.

The pressure washer kit includes a set of DAEWOO 0°/15°/25°/40° soft-coated nozzles that leave no marks on the surface in case of accidental contact. The nozzles can be conveniently stored in designated slots on the pressure washer body. Professional DAEWOO high-pressure washers are equipped with a reinforced, rotating brass-body nozzle designed to operate at maximum pressure and water flow. The nozzle is coated on the outside with a soft rubberized material.

• Power consumption: 3200 kW•
Voltage: 230 V•
Operating pressure: 195 bar•
Water flow rate: 700 l/h•
Pump material:
brass• Fine water filter: yes•
Maximum water inlet temperature: 50
°C• Rotating nozzle: yes•
Auto-stop: yes•
Hose length: 15 m•
Cable length: 5 m•
Hose reel: yes