DAEWOO DAX 3521LI CORDLESS IMPACT DRILL SET

This model is compatible with all DAEWOO 21 V batteries. The brushless motor delivers high power with lower energy consumption, allowing the battery to operate up to 50% longer on a single charge. With a maximum torque of 220 Nm, this screwdriver can handle even the most challenging tasks. The keyless 1/4 HEX chuck ensures quick tool setup and secure fastening during operation. The 1/4 HEX hexagonal chuck allows the tool to be used with all accessories featuring this type of attachment. The control panel located at the bottom of the housing allows you to select preset torque settings and preset automatic operating modes.

The screwdriver has 4 preset torque modes: 1 – 20 Nm; 2 – 30 Nm; 3 – 80 Nm; 4 – 220 Nm; switching between modes is done using the “Nm” button on the control panel. The quick-change mode button allows you to quickly switch between torque settings. It can also be used to quickly switch between standard mode and one of the preset automatic modes. If necessary, the quick-switch function can be disabled. The LED light ensures bright illumination of the work area. Three brightness levels and an off option allow you to conveniently use the backlight or turn it off. “Flashlight” mode allows you to use the backlight without turning on the screwdriver.

The screwdriver has 4 automatic operating modes: A—tightening at full speed, loosening at full speed, with automatic shutdown after the fastener is loosened; W – rotation at minimum speed at the start of tightening, with automatic speed increase when load is applied; T1 – rotation starts at maximum speed. Automatic stop when load increases. The stopping time depends on the fastener and material; T2 – rotation starts at maximum speed. Automatic reduction of rotation speed as load increases.

The case is made of durable plastic and features a modular stackable design with latches that allow multiple cases to be quickly and securely stacked on top of one another, simplifying transport and saving storage space. The case features a separate compartment for conveniently carrying necessary accessories and fasteners. A metal clip allows the screwdriver to be securely attached to the technician’s belt while in use. The set includes a 21 V / 4.0 Ah battery and a 2.5 A battery charger.

• Capacity: 4.0 Ah•
Battery type:
Li-Ion• Number of speeds:
4• Maximum torque: 220 Nm•
Torque adjustment:
20/30/80/220• Rotation speed: 0–3,600 rpm•
Impact rate: 0–3,800 impacts/min•
Chuck type: 6.35 (1/4" HEX)
• Battery charge indicator: yes