DAEWOO DAX 8021LI Cordless Impact Driver

This model is compatible with all DAEWOO 21 V batteries. The brushless motor delivers high power with lower energy consumption, allowing the battery to run up to 50% longer on a single charge. With a maximum torque of 1,500 Nm, this screwdriver can handle even the most challenging tasks. The 3/4" square drive ensures a secure grip on impact sockets. The control panel located at the bottom of the housing allows you to select preset torque settings and preset automatic operating modes.

The impact wrench has 4 preset torque modes: 1 – 700 Nm; 2 – 900 Nm; 3 – 1,100 Nm; 4 – 1,500 Nm. Switching between modes is done using the “Nm” button on the control panel. LED lighting allows the impact driver to be used effectively even in low-light conditions. The impact driver has 4 automatic operating modes: 1 AUTO – automatic stop. When tightening – stops when a load is detected. When tightening—stops when the load is removed; 2 AUTO—automatic stop with additional tightening. When tightening—stops 0.5 seconds after a load is applied. When unscrewing—stops 0.2 seconds after the load is released; 3 AUTO—automatic speed reduction. When tightening—stops 1 second after a load is applied. When unscrewing—speed decreases as the load decreases; 4 AUTO—rotates at full speed when any button is pressed.

• Battery type:
Li-Ion• Number of speeds:
4• Maximum torque: 1500 Nm•
Torque adjustment:
700/900/1100/1500• Rotation speed: 0–1800
rpm• Impact rate: 0–2,200 impacts/min•
Chuck type: 3/4" square