GRAND MEYER HEATING CABLE 115M THC20-115, 20 W/M, 230 V, 2300 W

The Grand Meyer THC20 is a two-conductor resistive electric heating cable with a linear power output of 20 W/m. It is used in floor heating systems for both primary heating and supplemental heating. It can also be used for snow and ice protection on small outdoor surfaces. The cable is supplied in ready-to-install heating power sections that include a power connection cable and hermetically sealed connection and end sleeves.

Heating cable technical specifications:
• Cable type: shielded twin-core cable.
• Power supply: ~230 V.
• Linear power at rated voltage: 20 W/m.
• Maximum operating temperature: +90 °C.
• Minimum installation temperature: –10 °C.
• Minimum bending radius: 6 cm.
• Cable outer diameter: 5.0 mm.
• Cable power connection lead: 3.0 m, PVC 3x1.0 mm².
• Wire colors: brown – phase (L), blue – neutral (N), yellow-green – ground (PE).
• Length tolerance: ± 2 %.

Heating cable construction:
• Twisted heating conductors made of CuNi, CuCr, or NiCr alloys, depending on resistance.
• New-generation heat-resistant cross-linked polyethylene (XPLE) inner insulation.
• Aluminum foil shielding.
• Drainage wire made of twisted Al-Mg strands.
• Outer insulation made of modified polyvinyl chloride (PVC) with enhanced heat resistance.

Kit contents:
• Grand Meyer THC20 uninsulated heating cable.
• Self-extinguishing PVC corrugated conduit with a temperature sensor housing.
• System installation instructions.
• Warranty card.

Grand Meyer heating mats and cables are manufactured in Latvia, Europe.
EcoNG170 heating mats and THC20 heating cables come with a 20-year warranty.