GRAND MEYER 9 M² FLOOR HEATING KIT, 200 W/M² + MST-10 THERMOSTAT

The “Grand Meyer THM200” electric dual-core heating mat is designed for comfortable floor heating in all types of rooms. Ideal for cold areas and for use as the primary heating source. It is installed under the floor covering in tile adhesive or a thin leveling layer (~5 mm). It is particularly suitable for use under ceramic tiles.

Heating cable construction:
• Conductors: CuNi, CuCr, NiCr.
• Internal FEP insulation.
• Aluminum shielding.
• Al-Mg drain wire.
• PVC outer insulation with enhanced heat resistance.
• 50 cm glass fiber mesh.

Connection:
• 3.0 m cold cable (PVC 3x1.0 mm²).
• A) Cable thickness: 3.6 mm.
• B) Attached to an ultra-thin 0.2 mm synthetic mesh.

Technical specifications:
• Type: double-insulated cable with shielding.
• Power supply: ~230 V.
• Power: 200 W/m².
• Max. operating temperature: +90 °C.
• Min. installation temperature: –10 °C.
• Cable diameter: 3.6 mm.
• Mat thickness: 3.8 mm.
• Mesh width: 50 cm.
• Heating cable: 3.0 m, PVC 3x1.0 mm².
• Wire colors: brown (L), blue (N), yellow-green (PE).

Recommended thermostats:
• Grand Meyer® MST-1 white / MST-10 black.

A simple temperature control switch with a status LED and a 3 m NTC 10 kΩ sensor that is installed in the floor. Controls a load of up to 16 A. Available in white and black. Flush-mounted installation.

• Power supply: ~230 V (–15%, +10%), 50 Hz.
• Load: 16 A / 3.6 kW.
• Power consumption: 5 W.
• Control: On/Off.
• Relay: trailing edge.
• LED: red.
• Operating temperature: –5 to +50 °C.
• Setting range: +5 to +40 °C.
• Hysteresis: 0.5 °C.
• Sensor: NTC 10 kΩ.
• Sensor resistance: 10 kΩ at +25 °C.
• Sensor cable length: 3 m.
• Housing: self-extinguishing PVC.
• Protection rating: IP20.
• Dimensions: 86x86x50 mm.
• Color: white or black.
• Certifications: CE, EAC.