GRAND MEYER 6 M² UNDERFLOOR HEATING KIT, 200 W/M² + HW800 THERMOSTAT

Electric dual-conductor heating mat for underfloor heating. Ideal for cold rooms or as a primary heating source. Installed directly under the floor covering in tile adhesive or a thin leveling layer (~5 mm). Recommended primarily for use under tiles.

Cable construction:
• CuNi, CuCr, NiCr conductors.
• FEP insulation.
• Aluminum shielding.
• Al-Mg drain wire.
• Heat-resistant PVC outer insulation.
• 50 cm glass fiber mesh.

Connection:
• 3 m cold cable (PVC 3x1.0 mm²).
• Cable thickness: 3.6 mm. Attached to a durable 0.2 mm mesh.

Technical specifications:
• Type: double-core cable with shielding.
• Power supply: ~230 V.
• Power: 200 W/m².
• Max. temperature: +90 °C.
• Min. installation temperature: –10 °C.
• Diameter: 3.6 mm.
• Mat thickness: 3.8 mm.
• Mesh width: 50 cm.
• Cold cable: 3 m, PVC 3x1.0 mm².
• Wire colors: brown (L), blue (N), yellow-green (PE).

Package contents:
• THM200 heating mat.
• Sensor tube.
• Installation instructions.

Recommended thermostat:
• Grand Meyer® HW500 white / HW800 black.

Modern programmable floor heating thermostat. Manual and automatic modes. Settings are saved in case of a power outage. Sensors: built-in + external NTC (3 m). Control based on a floor sensor, room sensor, or a combination of both. Flush-mounted installation.

Technical specifications:
• Power supply: ~230 V (±15%), 50 Hz.
• Load: 16 A / 3.6 kW.
• Power consumption: 2 W.
• Control: on/off.
• Relay: trailing.
• Operating temperature: –5 to +50 °C.
• Setting range: +5 to +95 °C (factory setting: +5 to +35 °C).
• Hysteresis: 0.5–10 °C.
• Sensor resistance: 10 kΩ at +25 °C.
• Sensor cable length: 3 m.
• Freeze protection: yes.
• Programming: 5+2 / 6+1 / 7 days.
• Protection class:
IP20• Dimensions: 90x86x43 mm.
• Color: white/black.
• Weight: 142 g.