The Ecovacs DEEBOT T30e OMNI robotic vacuum cleaner with a cleaning station washes the floor using the OZMO Turbo 2.0 system’s two rotating mop pads, which are continuously moistened by a steady stream of water. With the TruEdge 2.0 system, the mop plate can move seamlessly between fully retracted and fully extended positions, allowing the mop to reach edges and corners. In the ZeroTangle 3.0 system, the ARClean side brush and the triple-V-shaped main brush with removable comb teeth prevent hair and pet hair from tangling around the brushes.
With the Carpet First feature, the robot first cleans carpets with a dry mop and only then cleans the rest of the floor. If the robot detects a new carpet during cleaning, it raises the mops by 9 mm. There are 4 modes to choose from for carpets: vacuuming only, no-go zone, pass-through only, and cleaning as on the floor. A laser rangefinder measures distances within a 8 m radius and maps the rooms. TrueDetect uses structured infrared light to detect obstacles from up to 0.3 m away. According to the manufacturer, TrueMapping 2.0 maps 96 m² in 8 minutes, and the ECOVACS HOME app can store maps for up to 3 floors. With the spot cleaning button, the robot cleans a 1.5 x 1.5 m area around itself.
The docking station empties the robot’s dustbin into a dust bag, which, according to the manufacturer, can hold up to 90 days’ worth of dust. The mops are washed with 75 °C water and dried with 45 °C warm air; the docking station then cleans its own washing tray with scrapers. The station’s 4-liter clean water tank fills the robot’s small water tank, and the cleaning solution is automatically mixed with water in a 1:200 ratio. The battery charges fully in about 4.5 hours, and charging can be scheduled outside of peak electricity hours.
Remove the protective materials and snap the parts into place until you hear a click. Place the station on a flat, hard surface against a wall, away from direct sunlight, leaving at least 0.05 m of free space on the sides and 0.8 m in front. The station’s water tank can be removed if there is 5 cm of free space above it. Clean the main brush and filter once a week, and the side brush every 2 weeks. Replace the mop pads every 1–2 months, the filter and side brush every 3–6 months, and the main brush every 6–12 months. Clean the clean water tank every 3 months; the app will notify you when it’s time to replace the dust bag. If the robot is not used for an extended period, charge the battery every 1.5 months.