This self-cleaning litter box with a camera works only with the PETKIT Crystal Litter Set—crystal cat litter and the litter tray; tofu or clay litter are not compatible. The entrance to the litter box is 180 mm high. According to the manufacturer, the litter does not need to be changed for up to 30 days for a single cat. The 304 stainless steel comb moves in two directions and collects waste into the waste collectors located on the sides of the litter box. Four sensors stop the rake when the cat enters the litter box. To reduce odors, the camera module includes an N60 odor eliminator with a fan, which, according to the manufacturer, removes up to 96% of ammonia.
The device connects to the PETKIT app via 2.4 GHz or 5 GHz Wi-Fi. In the app, you can set the cleaning frequency and duration, track your cat’s litter box visits, and view live camera footage and recordings. The camera sends a notification when it detects liquid waste or the cat meowing while using the litter box. The AI camera is self-installing: connect the device’s cable to the camera’s port, place the camera in the mounting bracket, and secure it with four screws using a hex wrench. Next, install the N60 odor eliminator, slide the camera’s back cover open, pour the crystal cat litter evenly onto the base, and connect the power supply. If the indicator light on the litter tray base is steadily green, the base is correctly in place. Before first use, pair the device with the PETKIT app.
If the litter tray’s indicator light is red, lift up the main unit, remove the used tray, place it in a trash bag, and discard it. Clean the waste catcher lid, comb, and main unit with a damp paper towel. Heavily soiled waste catcher lids can be removed and, after air-drying, replaced one by one. Then place a new liner and cat litter in the tray.